Used Rima RS-2510S 13" Compensating Stacker

Used Rima RS-2510S 13" Compensating Stacker with:

• The RS-2510S is rated at up to 60,000 products per hour, and works directly in line with most standard press deliveries or rotary trimmers to produce counted, compressed and compensated stacks of superior quality of inserts, or signatures with minimum manning.
• Function:
  • The product enters the stacker in shingled form.
  • The diverter is activated when there is a jam in the stacker, thus allowing the press to continue to run while the jam is cleared.
  • Once past the divert area, the product enters the stream aligner which ensures that the edges of the stream are perfectly uniform. The product subsequently passes through a squeeze roller which tightens the fold of the product. 
  • Precision counting of the product occurs as the next step in the process followed by forming a gap which breaks the stream into pre-selected batch quantities.
  • The batch flows into the upper bin unit which uniformly aligns the stack.
  • The batch quantity of products cannot exceed the height capacity of the upper bin unit.
  • The batch is then dropped into a lower bin. To minimize the drop, the customized turntable is raised.
  • The turntable lowers the stack while compression pins for all four corners are extended above the stack. As the turntable raises, it then compresses the stack removing the air and firming the stack. (This is the key operation used in forming the excellent quality stacks.) While the turntable is compressing the stack, it can be rotated 180 degrees to provide for a compensated stack. The batches are accumulated in the lower bin until the total stack count is reached. The gates of the lower bin are then opened and the pusher moves the stacks onto the delivery table. 
• Product dimensions:
  • Width: 6 inches to 12.63 inches
  • Length: 6 inches to 18.5 inches
  • Diagonal: 20.5 inch maximum 
• Thickness: 4 pages to 96 pages
• Cycle speed: up to 60,000 copies per hour depending on size, thickness and signature speed
• Air requirement: 6 cfm at 80 PSI