Adco 15DZ-60 Handload Horizontal Glue Cartoner with Nordson Glue System Up To 30 Cartons Per Minute

Description:

The 15DZ-60-SS is a continuous motion machine designed to erect cartons from the 24” gravity carton hopper with a single head rotary carton feeder.  The carton feeder vacuum is activated by a signal from the operator actuated foot switch.  After the cartons are erected they pass by a 4’ hand load table for product loading by the operator. The carton flaps are folded and closed with hot melt adhesive.  The finished cartons are then discharged from the end of the machine.

• Capacity: up to 30 cartons per minute
• Carton size range:
  • Length of opening: 1 - 9 inches
  • Width of opening: 1 - 4 inches
  • Carton depth: 4 - 12 inches
  • Carton size may require changeover and/or change parts
• Continuous motion with 1 horsepower variable speed drive system with main drive overload protection
• Carton Magazine:
  • Gravity fed
  • Length: 24 inches
  • Adjustable pick gate
• Rotary carton feeder
• Vacuum generator
• Foot switch for carton picking vacuum control
• Hand load table: 48 inches long
• Non-captured flight chains with 12 inch lug centers
• Horizontal minor flap tucker on downstream load side
• Nordson hot melt glue unit with separate electrical disconnect
• Left hand product load side
• Carton bottom to floor elevation: 36 inches
• Scales on all major changeover adjustments
• NEMA 12 (IP55) electricals
• Electrical: 230 volts, 3 Ph, 60 Hz, 30 amps
• Air requirements: 10 CFM @ 95 psi
• Stainless steel main frame construction with casters and leveling feet