Carrier CFBD/C-6'-6" X 19'-6" Stainless Steel Conventional Fluid Bed Dryer/Cooler

Description:

Used Carrier Fluid Bed Dryer with:

• Production capacity: up to 6 tons per hour @ 8% moisture (wet basis) depending on product and application
• Product bulk density: between 55 and 60 pounds per cubic foot
• Minimum particle size: 0.2 inches
• Inlet moisture: 20% (wet basis)
• Discharge moisture: < 8% (wet basis)
• Material inlet temperature: 180-200° F
• Maximum material drying temperature: 235° F
• Material discharge temperature: < 140° F
• Drying air temperature: 275° F
• Ambient cooling air temperature
• Air heating media: steam @ 75 PSIG (at coil face)
• Material inlet diameter: 24 inches
• Discharge housing width: 36 inches
• 5 internal material baffles
• Pneumatically activated drying and cooling zone divider
• Exhaust port diameter: 58 inches
• Plenum access manway diameters (2): 20 inches
• Lexan viewing ports: 4
• Air plenum drain diameters (2): 3 inches
• Approximate overall dimensions:
  • Length: 262 inches
  • Width: 91 inches
  • Height: 95 inches
• 304 stainless steel construction
• Cooling air supply fan motor: 60 horsepower
• Exhaust fan motor: 100 horsepower
• Drying air supply fan motor: 250 horsepower
• Electrical: 3 Phase, 60 Hz, 460 Volts

Previously used in a split pea application