Doosan NHP4000 CNC 4-Axis Horizontal Machining Center With Pallet Pool And Tool Changer

Description:

Used Doosan NHP4000 Machining Center:

• Type of CNC control: Fanuc 31i-B 
• Axis travel:
  • X-Axis Travel 22.047 in (560 mm)
  • Y-Axis Travel 25.196 in (640 mm)
  • Z-Axis Travel 25.984 in (660 mm)
• Table loading area: 15.75 x 15.75 inches
• Maximum part diameter 24.8 in (630 mm)
• Maximum part height (with no hydraulic interface) 35.43 in (900 mm)
• Indexing table and pallet changer: indexing full B-axis
• Indexing table and pallet changer: pallet surface (standard, no center bushing) (24) M16 x 2.0 tapped base
• Motion: X, Y and Z axes rapid traverse rate 2,362 ipm (60 m/min)
• Spindle
  • Big Plus Spindle System CAT 40 Big Plus
  • Speed 15,000 rpm
  • Motor (S3 25%) 25 / 49.6 hp (18.5 / 37 kW)
  • Torque (S3 10%) 223.6 ft-lbs (303 nm)
• Automatic Tool Changer Specifications: Number of Tools 275
• DN Linear Pallet System
• Pallet Dimension 15.7 x 15.7 in (400 x 400 mm)
• Workpiece Diameter 24.8 / 23.6 in (630 / 600 mm)
• Workpiece Weight 881.8 lbs (440 kg)
• Forking Type Single Fork (Telescopic Mechanism)
• Turntable Indexing 45Ń
• Number of Machines Expandable 1 ~ 7
• Number of Setup Stations 1
• Number of Pallets 12 (6 x 6 Double Stack)
• Equipped With
  • CUFOS PC based control system
  • Fanuc 31i-B Control
  • 275 Position Matrix Tool Magazine
  • LPS4000-12 Pallet Pool
  • LNS\Turbo, MF2, rear discharge, filtering chip conveyor
  • ChipBLASTER Modular* 1,000 PSI, 2-8 GPM variable flow coolant system
  • MistBLASTER Modular* 1200 CFM mist collector.
  • Renishaw NC4 universal tool setting probe.
  • Renishaw RMP60 spindle probe,
  • BK Mikro, tool changer mounted, broken tool detection system.
  • (12) Pallets included (tombstones not included)
• Power Required 80 kVA / 210 amps @ 220v
• Voltage Required - Fanuc 2-5-235 Volts / 3 Phase
• General: Machine Height 105.9 in (2,690 mm)
• General: Floor Space Required (L x W) 195 x 90.55 in (4,950 x 2,300 mm)
• General: Machine Weight 21,384 lbs (8,700 kg)