Wintek CR50-WSS-100/V-1FRss Solvent Recovery Liquid Ring Vacuum System

Description:

Used Wintek Vacuum Pump with:

• Nominal vacuum capacity: 100 ACFM
• Operating pressure: 100 Torr
• Designed vapor removal: approximately 300 kilograms of water per batch
• Designed batch time: approximately 1–3 hours
• Application vessel capacity:
  • Vessel size: 62 cubic feet
  • Batch volume: 35 cubic feet
• Inlet temperature: approximately 100° C
• Single-stage liquid ring vacuum pump
• Pre-condenser:
  • Shell-and-tube design
  • Carbon steel shell
  • 316 stainless steel tube side
  • Cooling water requirement: approximately 185 GPM @ 85°F
• 50-gallon condensate receiver:
  • 316 stainless steel construction
  • Protected level sight gauge
  • High- and low-level switches
  • Manual drain and vent valves
• Stainless steel condensate transfer pump:
  • 0.5 horsepower
  • Discharge check valve
  • Pressure indicator
  • Manual adjusting valve
• Sealant recirculation system:
  • Stainless steel separator tank
  • Automatic sealant makeup
  • Low-level switch
  • Protected sight gauge
• Sealant heat exchanger:
  • Stainless steel process-contact construction
  • Cooling-water requirement: approximately 15 GPM @ 85°F
  • Y-strainer
  • Flow switch
  • Regulating valve
  • Temperature and compound pressure gauges
• Stainless steel process-contact components
• Viton elastomers
• Control panel with:
  • Vacuum pump start and stop controls
  • Transfer pump hand-off-auto selector
  • Shutdown indicator lights
  • System reset
  • Elapsed runtime meter
  • Motor overload protection
• Stainless steel skid-mounted construction
• Non-hazardous area classification
• Motor: 7.5 Horsepower
• Electrical: 3 Phase, 60 Hz, 480 Volts