(812) 303-8383 | Email Us
(812) 303-8383 | Email Us
31 Used Items
Page 1 of 3
Glue case erectors fold the two bottom minor flaps of an case blank, then apply glue to both of the minor flaps and fold over the major flaps. The formed case is then held for a short time to ensure that the glue dries and hardens, providing a strong seal. Glue sealing of cases can also mean less change outs when compared to tape, saving time during production runs. A glue bottom seal case erector can use either cold or hot melt glue.
Used Stone Packaging Glue Bottom Case Erector with: Application: erects and seals the bottom flaps of boxes Previous case dimensions: 19.75 inches high x 26 inches wide Hot glue Capacity: up to 10...
Used Pearson CE35-G Case Erector with: Speeds: up to 35 cases per minute Case size range: Minimum: 5 inches long x 3.5 inches wide x 3.5 inches high Maximum: 30 inches long x 24 inches wide x 26...
Used Wexxar WF-2H Hot Glue Case Former with: Runs up to 25 cases per minute Case size requirements: Minimum: 7 inches long x 5 inches wide x 5 inches high Maximum: 25 inches long x 178 inches...
Used Pearson R211 Automatic Glue Case Erector with: Output: up to 30 cases per minute Case size range: Maximum: 21 inches long x 17 inches wide x 21 inches tall Minimum: 6 inches long...
Used Massman CE AAP Glue Case Erector with: Automatic glue case erector Currently set to run 7 inch wide x 14 inch tall cases Powered blank case magazine Allen-Bradley CompactLogix PLC Allen-Bradley...
Used Wexxar WFH Automatic Case Erector with: Case size range: Minimum: 6 inches long x 5 inches wide x 3.5 inches tall Maximum: 24 inches long x 16.5 inches wide x 16.5 inches tall Output:...
Used Marq HPE-NS-G/LH/AB Bottom Seal Case Erector with: Glue case erector bottom sealer with bundle hopper Case size range: Minimum: 10 inches long x 8 inches wide x 6 inches tall Maximum:...
Used Pearson CE70 Glue Case Erector with: Output up to 70 cases per minute Allen-Bradley CompactLogix PLC PanelView Color HMI Fast changeovers supported by scales, pointers, quick release handles...
Used Southern Packaging CE-900 Case Erector with: System includes Carton erector with bottom sealer Single head case unit Attached Nordson series 3500 hot melt glue unit Adjustable...
Used Wexxar WFH Case Erector with Hot Glue System with: Inline case erector Bottom hot melt glue sealer Output: 5 - 20 cases per minute Case size range: Minimum: 6 inches long x 5...
Used Marq Case Erector with: Automatic adjustable bail hopper Four case transfer suction pads Pneumatic case erector with flap guides Glue tip with four spring nozzles Two pneumatic case compressor...
Used Langston Saturn 3 Flexo Folder Gluer: 3 color Computerized set-up TEI Block push prefeeder Sun lead edge feeder Skip feed Roll to roll ink system Gartech glue wheel Die Cut Section...
Used Marq Tuff Case / Box Erector: Sets up and seals cases automatically Erects and seals up to 40 cases per minute Direct Logic 205 plc .75 horsepower
Used Southern Packaging CE-900 Top and Bottom Sealer with: System includes Carton erector with bottom sealer Carton sealer with top sealer Both system seal with hot melt glue system ...
Used Adco ABF-540V Bliss Case Former with: Nordson ProBlue glue system with 4 applicators and 6 nozzles Currently set for 16 inch long x 10 inch wide x 11 inch deep bliss cases Stainless steel frame...
Showing 1-15 of 31 Items