Used Plastics Equipment

101 Used Items
Page 6 of 7

Search Within Plastics Equipment

Uniloy 350 R-1 Blow Molding Machine 4 Heads

Used Uniloy 350 R-1 Blow Molding Machine with: 4 heads 8 inches between heads Capacity: from 1 to 4 liters Shoot size: 900 grams 50 CFM Previously produced dairy bottles

Liberty RS 3500 Blow Molding Machine

Used Liberty RS 3500 Blow Molding Machine with: 10 heads Distance between heads: 4 inches Capacity: from 150 ml to 900 ml Shoot size: 1100 grams 70 CFM Previously used for dairy bottles

Uniloy 350 R-2 Blow Molding Machine 4 Heads

Used Uniloy 350 R-2 Blow Molding Machine with: 4 heads Distance between heads: 8 inches Capacity: from 1 to 4 liters Shoot size: 1100 grams 50 CFM Previously produced dairy bottles

Moretech Machinery MTB-2A S3 Plastic Blow Moulder

Used Moretech Machinery MTB-2A S3 Plastic Blow Moulder with: Speed: up to 1500 bottles per hour Maximum bottle volume: 1.5 liters Bottle type specifications: Maximum bottle mouth diameter: 80 millimeters...

Zhangjiagang Eceng Machinery S4 Bottle Moulder

Used Zhangjiagang Eceng S4 Bottle Moulder with: Speed: up to 1000 bottles per hour Maximum bottle volume: 2 liters Bottle type specifications: Maximum bottle mouth diameter: 80 millimeters Maximum...

Cumberland Plastic Grinder Aperture 20" W x 13" T

Used Cumberland Grinder with: Infeed: Width: 20 inches Height: 13 inches From ground: 53 inches Discharge height: 34 inches Last used for plastic

Engel ES1050 250 HL Ton Injection Molding Machine

Used Engel Injection Molder with Clamp force: 250 tons Tie-bar clearance: 1050 x 650 Screw diameter: 50 mm / 2 inches Calculated shot volume: 422 cm³

Uniloy Milacron IBS 70 Blow Molding Machine

Used Uniloy Blow Molding Machine with: Injection unit: Diameter: 44mm / 1.7 inches Motor: hydraulic L/D ratio: 21:4 Maximum shot size: 216 grams Clamp force injection mold: 63 tons Clamp...

ES Aqua Blow Molder and Cleated Incline Conveyor

Used ES Aqua Blow Molder and Cleated Incline Conveyor with: Cleated incline conveyor Infeed height: 41 inches Discharge height: 83 inches Conveyor width: 12 inches Cleat centers: 5 inches...

Egan 3.5 Inch Extruder for Plastics

Used Egan Extruder with: 24:1 L/D ratio Gearbox: Ratio: 11.48:1 Horsepower: rated to 265 hp 3.5 Inches diameter feed throat Centerline: 42 inches New: Air cooled heat bands Cooling...

Welex 350-30 3.5 Inch Five Barrel Plastic Extruder

Used Welex 350-30 3.5 Inch Five Barrel Plastic Extruder with: 5 barrels with one adapter 4 die zones BC-580 temperature controls Non-vented barrel at 50 inches centerline Lufkin gear box ratio...

Davis Standard 3.5 Inch 30:1 L/D 200 HP Extruder

Used Davis Standard 3.5 Inch 30:1 L/D 200 HP Extruder with: Maximum safe operating pressure: 10,000 PSI Maximum safe operating temperature: 550 degrees Fahrenheit 52 inch centerline 200 horsepower, 500...

Longsun LX4EL Automatic PET Blow Molder

Used Longsun LX4EL Automatic PET Blow Molder with: Capacity: up to 4000 bottles per hour Maximum bottle capacity: 600 milliliters Maximum bottle diameter: 200 milliliters Maximum neck diameter: 45...

Sterling 4 1/2 Inch Extruder

Used Sterling 4 1/2 Inch Extruder with: Barrel cools in the water The engine fires up to 629 amperes Engine 400HP DC Oil capacity 17.6 gallons

HPM 2.0 TMC 30 Single Screw Extruder

Used HPM 2.0 TMC 30 Single Screw Extruder with: Screw size: 2 inches 30:1 L/D ratio Water cooled Vented and plugged 20 horsepower motor 1750 RPM Manual control switches

Showing 76-90 of 101 Items