Used Manual L-Bar Sealer

107 Used Items
Page 2 of 2

S-24-B photo
Shanklin S24B Semi Automatic L Bar Sealer

Used Shanklin S24B Semi Automatic L Bar Sealer with: Shanklin shrink tunnel included: Model T-6H Seals up to 15 inches wide x 33 inches long Adjustable height Automatic sealing...

5202 photo
Weldotron 5202 L-Bar Sealer and Heat Tunnel

Used Weldotron 5202 Semi-Automatic L-Bar Sealer and Heat Tunnel with: Weldotron 5202 Semi-Automatic L-Bar Sealer: Production speed: 20 packages per minute Push Operated Automatic package discharge...

PP1622-Combo photo
Preferred Packaging PP1622-Combo L-Bar Sealer

Used Preferred Packaging P1622-Combo L-Bar Sealer with: Sealing area: 16 inches wide x 22 inches long Film width: 20 inches maximum Micro knife sealing Easy load film cradle with brake Seal head...

PP1622W / PP1808-28 photo
Preferred Packaging L-Bar Sealer and Heat Tunnel

Used Preferred Packaging L-Bar Sealer and Heat Tunnel with: Sealing area: 16 inches wide x 22 inches long Film width: 20 inches maximum Micro knife sealing Easy load film cradle with brake Seal...

5201A photo
Weldotron 5201A L-Bar Sealer w/ 7221 Heat Tunnel

Used Weldotron 5201A L-Bar Sealer w/ 7221 Heat Tunnel with: Approximately 14 inch wide take away belt Approximately 15 inch by 20 inch seal area Locking magnets on seal bar Hot wire with compensation...

S24BL photo
Shanklin S24 and T6HC L-Bar Sealer and Heat Tunnel

Used Shanklin S24 and T6HC L-Bar Sealer and Heat Tunnel with: Shanklin S24BL L-Bar Sealer Power film unwind Brush backed pink perforator Film inverting head One piece hot knife sealing...

3252 photo
Aline Qvac 5232 LBar Sealer and Heat Tunnel

Used Aline Qvac 5232 Lbar Sealer with Heat Tunnel with: Sealing area: 27 inches wide x 40 inches long Up to 150 pieces per hour With conveyor With single chamber heat tunnel Painted steel ...

S24C photo
Shanklin S24C Manual L-Bar Sealer

Used Shanklin S24C Manual L-Bar Sealer with: Powered infeed Air requirements: 60 psi Belt dimensions: 32 inches long x 19.5 inches wide Conveyor elevation pictured at 34 inches above the floor ...

T-18-8-M photo
Beseler T-18-8-M Heat Tunnel and L-Bar Sealer

Used Beseler Heat Tunnel and L-Bar Sealer with: Aperture is as follows 18 inches wide 8 inches high 16 inch wide belt 32 inch elevation L-Bar Format 18 inch wide ...

E150 photo
Conflex E150 Semi-Automatic L-Bar Sealer

Used Conflex E150 Semi-Automatic L-Bar Sealer with: Seal jaw area: 18 inches wide 22 inches long Maximum package height: 6 inches Film roll width: Maximum:...

S24 BL photo
Shanklin S24 BL Manual L-Bar Seal Wrapper

Used Shanklin S24 BL Manual L-Bar Sealer with: Powered infeed PSI requirements: Maximum: 60 psi Minimum: 40 psi Belt width: 19 5/8 inches

1620 c photo
Sergeant Model 1620 C Shrink Wrapper

Sergeant Model 1620 C Shrink Wrapper Model number 1620 C

OS-1620 photo
Seal-A-Tron OS-1620 Ocono Manual L-Bar Sealer

Used Seal-A-Tron OS-1620 Ocono Manual L-Bar Sealer with: 120 VAC - 11 Amp Aluminum extended seal-head Ceramic beads for seal wire backing Mag-lok sealing magnet, film clamps Tru-temp seal wire control...

EM photo
RBS Equipment EM Semi-Automatic L Bar Sealer

Used RBS Equipment Model EM Semi-Automatic L Bar Sealer with: Cycles at 20 packages per minute Includes discharge conveyor Magnetic hold down Perforator roller and floor stand with castors Sealing...

SMC 3042 photo
Damark SMC 3042 Semi-Automatic L Bar Sealer

Used Damar SMC 3042 Semi-Automatic L Bar Sealer with: Sealing area: 30 inches wide x 42 inches long Counterbalanced sealing head with automatic air cushion return Easily adjusted film cradle Film...

S24B & T7 photo
Shanklin S24B Heat Sealer w/T-7 Tunnel

Used Shanklin S24B Heat Sealer w/T-7 Tunnel: Semi-automatic operation Product flow feed from right Power film unwind Automatic package discharge One piece hot knife seal 15-20ppm Model T-7...

6401 photo
Weldotron 6401 L Bar Sealer w/Tunnel

Used Weldotron 6401 L Bar Sealer with: 16" x 20" seal bars Weldotron model 7112 heat tunnel 15" conveyor width on tunnel

Showing 91-107 of 107 Items

Enter your email address to get started.