Used Plastic Injection and Blow Molding and Extrusion Equipment

24 Used Items
Page 1 of 2

PLASTIC INJECTION MOLDING is a method to obtain molded products by injecting plastic materials molten by heat into a mold, and then cooling and solidifying them. The method is suitable for the mass production of products with complicated shapes, and takes a large part in the area of plastic processing. (pool chemical buckets, aerosol caps, plasticware, legos) BLOW MOLDING is a process for forming plastic objects in which plastic is melted, put in a mold, and then shaped by having compressed air blown into it. (Water bottles, shampoo bottles, orange barrels/cones) EXTRUSION is a process of converting a solid plastic mass, pellet or powder into a melted form where it is pushed through a die into a shape. This shape is then moved through various secondary operations where it is cooled then cut, coiled or experiences a variety of other possible operations. (PVC water and sewer pipes, plastic tubing for oxygen, drinking straws) There is a uniqueness to each primary process. Extrusion is continuous, injection molding is discontinuous and blow molding would also be considered continuous.

3518-D photo
Egan 3.5 Inch Extruder for Plastics
Inventory #: D8037

Used Egan Extruder with: 24:1 L/D ratio Gearbox: Ratio: 11.48:1 Horsepower: rated to 265 hp 3.5 Inches diameter feed throat Centerline: 42 inches New: Air cooled heat bands...

350-30 3.5″ photo
Welex 350-30 3.5 Inch Five Barrel Plastic Extruder
Inventory #: D8034

Used Welex 350-30 3.5 Inch Five Barrel Plastic Extruder with: 5 barrels with one adapter 4 die zones BC-580 temperature controls Non-vented barrel at 50 inches centerline Lufkin gear box ratio...

30:1 L/D photo
Davis Standard 3.5 Inch 30:1 L/D 200 HP Extruder
Inventory #: D8031

Used Davis Standard 3.5 Inch 30:1 L/D 200 HP Extruder with: Maximum safe operating pressure: 10,000 PSI Maximum safe operating temperature: 550 degrees Fahrenheit 200 horsepower Baldor motor Ratio:...

LX-4EL photo
Longsun LX4EL Automatic PET Blow Molder
Inventory #: D7844

Used Longsun LX4EL Automatic PET Blow Molder with: Capacity: up to 4000 bottles per hour Maximum bottle capacity: 600 milliliters Maximum bottle diameter: 200 milliliters Maximum neck diameter: 45...

Sterling 4.5
Sterling 4 1/2 Inch Extruder
Inventory #: D7573

Used Sterling 4 1/2 Inch Extruder with: Barrel cools in the water The engine fires up to 629 amperes Engine 400HP DC Oil capacity 17.6 gallons

2.0 TMC 30 photo
HPM 2.0 TMC 30 Single Screw Extruder
Inventory #: D7516

Used HPM 2.0 TMC 30 Single Screw Extruder with: Screw size: 2 inches 30:1 L/D ratio Water cooled Vented and plugged 20 horsepower motor 1750 RPM Manual control switches

MH250-13 photo
Cincinnati MH250-13 250 Ton Injection Molder
Inventory #: D6135

Used Cincinnati MH250-13 250 Ton Injection Molder with: Capacity: 250 Tons Shot Size: 13 ounces Platen Size: 30.7 inches x 30.7 inches Tie Bar Spacing: 22.05 inches x 22.05 inches Clamp Stroke:...

ES700/250 photo
Engel ES700/250 250 Ton Injection Mold Machine
Inventory #: D6131

Used Engel ES700/250 Injection Mold Machine with: Shot Size: 15.9 ounces Tie Bar Spacing: 21.02 inches x 18.03 inches Platen Size: 32.68 inches x 29.69 inches Daylight: 7.87 inches - 41.73 inches...

1000 DH 2 photo
CMPP 1000/D/H/2 Extrusion Blow Mold Machine
Inventory #: D4936Featured

Used CMP 1000/D/H/2 Extrusion Blow Mold Machine with: De-Flashing system Screw Diameter - 50 mm Blowing capacity - 10 ml Screw Speed:0-75 Maximum Die Diameter - 60 mm Oil Tank Capacity - 200...

CSW-35 photo
SIUS American Blown Film Extruder
Inventory #: D3336

Used SIUS American Blown Film Extruder with: Smooth bore Screw: 45mm/1.8 inches 2 inch die Nip: 39.5 inches wide Dual lip air ring Line runs 8 - 14 inches layflat

SFR 16 photo
SIPA 16 Cavity PET Reheat Stretch Blow Molder
Inventory #: D1941

Used SIPA 16 Cavity PET Reheat Stretch Blow Molder with: Previously running: 500 milliliter PET bottles at 400 per minute at 91% efficiency on 8.5 gram preforms with 26.67 millimeter neck finish Preform...

502T2 photo
Boy 50T2 50 Ton Injection Molding Machine
Inventory #: C9413

Used Boy 50T2 50 Ton Injection Molding Machine with: 50 Tons of closing force 83,138 hours Hydraulic closing Platen inside tie bars 305 x 305 millimeters Max platen daylight 600 millimeter ...

FHB 106-1 photo
Fischer FHB 106-1 Blow Molding Machine
Inventory #: C7983

Used Fischer FHB 106-1 Blow Molding Machine with: 80 millimeter extruder Extruder output: 220 pounds per hour Mold dimensions: 360 millimeter (14.17 inch) width x (2) 130 millimeter (5.12 inch) depth...

6 photo
Gala 6 Plastic Pelletizer
Inventory #: C8791

Used Gala 6 Plastic Pelletizer with: Output rate: 60 - 300 gallons of melt per hour Outfeed diameter: 6 inches Includes: hydraulic valve cutting face plate

HT3 photo
Barwell HT3 Extruder
Inventory #: C4989

Used Barwell HT3 Extruder with; 2.625 inch diameter out feed Last used for shingle production

Showing 1-15 of 24 Items

Enter your email address to get started.