Used Self Locking and Tuck Tab Tray Erector
16 Used Items
Page 1 of 2
This type of equipment uses a pre-cut tray to lock itself into the correct form. A blank tray is pushed through a former by a platen. The edges of the tray are folded up by the platen and secured into position by the self-locking tabs.
Search Within Self Locking and Tuck Tab Tray Erector
Pearson BE60 6-Pack Beverage Carrier Erector with Twin Lane Conveyor
Used Pearson BE60 6-Pack Beverage Carrier Erector with: Output rate: up to 60 cases per minute, depending on size Chain driven belt Outfeed dimensions: Height: 43.5 inches Width: 10.5 inches ...
Delkor Systems Trayfecta TF 901 Tray Former Unit
Used Delkor Systems Trayfecta TF-901 Tray Former Unit with: Designed to handle paperboard and corrugate Production output rate: Up to 55 cycles per minute, depending on materials and application...
Kliklok KFD Tuck Tab Corrugated Tray Erector
Used Kliklok KFD Tuck Tab Corrugated Tray Erector with: Presently running tabbed tray design Inclined carton magazine Single head configuration Control Techniques Commander AC drive Painted steel...
Jones Automatic Tuck Tray Former
Used Jones Carton Erector with: Single lane Blank carton dimensions: Finished tray dimensions: 3 inches wide x 3 inches long Discharge height: 41 inches Reliance AC motor drive Stainless...
Adco AFH 60 Fully Automatic Tuck Tray Erector
Used Adco Automatic Tuck Tray Erector with: Output: up to 40 cartons per minute Finished tray size: 4 inches to 10 inches wide 5.5 inches to 11 inches long 1 inch to 4 inches deep ...
Doboy 751 Self Locking & Tuck Tab Tray Erector
Used Doboy 751 Self Locking & Tuck Tab Tray Erector with: Output: up to 60 trays per minute Automatic operation Single head Tray range: 4 inches to 20 inches long 3 inches to 17 inches...
Eagle Packaging Poplok Tuck Tab Tray Erector
Used Eagle Packaging Tray Erector with: Air requirement: 36 SCFM @80psi @ 20 tpm Air connection to machine: 3/4 inch pipe @ 100psi minimum Cup diameter: 3 inches Max carton width: 16 inches Pusher:...
Kliklok "JR" Model Single Mandrel Tray Former
Used Kliklok Tray Former with: Single mandrel, top load former Output: up to 75 trays per minute Tray size range: Minimum (inches): 3.94 long x 3.54 wide x 0.787 deep Maximum (inches): 16.5...
Econocorp Simplex 8634 Tray Former
Used Econocorp Simplex 8634 Tray Former with: Application: automatically form simplex style trays from flat die cut blanks Designed to accommodate either paperboard or corrugated materials, as well as...
Automatic Robotic Pulp Molder for Egg Cartons
Used Automatic Robotic Pulp Molder for Egg Cartons with: Conveyor 10 m length (1 unit) (32.81 feet) Pulper (1 unit) Low-concentration (1% to 2.5% recycled paper), stainless,...
A.E. Randle 16-26 Tray Former
Used A.E. Randle 16-26 Tray Former with: Central lube points for bearings Thompson shafts used for linear bushing surfaces Safety interlocked "Lexan" guarding and access panels 0.5 Horsepower...
A.E. Randle 16-26 Tray Formers
Used A.E. Randle 16-20 Tray Former with: Central lube points for bearings Thompson shafts used for linear bushing surfaces Safety interlocked "Lexan" guarding and access panels 0.5 Horsepower...
AE Randles 16-26 Tray Former Tab Locked
Used AE Randles 16-26 Tray Former with: Two forming heads and change parts for a lid and base: 11 27/32 inches x 4 3/8 inches Epoxy painted steel frame 15 minute change over time Central lube points...
AE Randles SM-1000 16-26 Tuck Tray Fomer
Used A.E. Randles 16-26 Tray Former with: “Steel-It” brand epoxy painted tube frame 15 minute change over time Central lube points for bearings Allen-Bradley Powerflex 4 controller ...
Sprinter MP11 Lock Style Forming Tray Erector
Used Sprinter MP11 Lock Style Forming Tray Erector with: Stainless steel construction Personnel guarding In line production Minimum tray size: 5 inches long x 4 inches wide x 1 inch tall Maximum tray...
Showing 1-15 of 16 Items