(812) 303-8383 | Email Us
(812) 303-8383 | Email Us
33 Results
Page 1 of 3
Urschel Crosscut Slicer with: Application: crosscut slices elongated products such as pickles, carrots, potatoes, etc. Hopper feed 13 Blade cutting head assembly Maximum product diameter: up to 2.75...
Used Urschel Crosscut Bias Slicer with: Application: angled coin cuts of oblong fruits and vegetables 45° Angled cutting head Slice thickness: Minimum: 1/16 Inch Maximum: 1.75 inches...
Used Urschel OC30 Slicer with: Cutting wheel diameter: 15 inches Blade Motor 2 horsepower, 1740 revolutions per minute 208-230/460 volts , 6.5-3.2 amps. Conveyor belt dimensions: 91 inches...
Used Urschel Comitrol 1700 Processor with: 30 HP motor Standard cut head Stainless steel frame
Used Urschel J9A Dicer with: 1/4" cross cut 3/4" circular knife spacing 3/8" feed roll spacing 3/16" stripper plate spacing Control panel with interlocks 5 HP 1175 RPM...
Used Urschel RA Dicer with: Cuts in three dimensions High speed centrifugal slicer for thickness, with screw adjustment Revolving corrugated feed drum and opposing feed spindle knives for positive feed...
Used Urschel CC-D Shredder with: Stainless steel frame Products measuring up to 3-1/2 inch (89 mm) in any dimension 10 horsepower motor
Used Urschel Model VSC Segment Cutter with: Lengthwise slicer cuts: Square Rectangular Segment Spear Wedge Stick Slab For products up to 4 inches in diameter including:...
Used Urschel Model HT Tomato Dicer with: Specifically configured for capturing juice while dicing, strip cutting and slicing of fresh and canned whole tomatoes Stainless steel frame All food grade stainless...
Used Urschel Model VSC Segment Cutter with: Lengthwise slicer cuts: Square Rectangular Segment Spear Wedge Stick Slab For products up to 4 inches in diameter including:...
Used Urschel Model OV Crosscut Slicer with: Stainless steel construction Hopper feed 16.625" diameter slicing wheel Accepts products up to 2.75" diameter 22 blade cutting head assembly...
Used Urschel CD-A Dicer with Stainless Steel Stand with: Blade assembly set to 0.25 inch dice Uniformly dices, strips or granulates Provides optimum cutting results in the small to intermediate size...
Used Urschel Model H Stainless Steel Grinder with: Out feed dimensions are 4.5 inches x 5 inches Hopper dimensions are 12.65 inches long x 19.25 inches wide x 16 inches deep 2 horse power motor Welded...
Used Urschel CD-A Dicer with: Uniformly dices, strips or granulates Provides optimum cutting results in the small to intermediate size range Accepts a maximum input product thickness of 3/8 inch (9.5...
Used Urschel G Stainless Steel Grinder with: Hopper dimensions are 19.5 inches wide x 15.5 inches long x 12 inches deep Out feed dimensions are 6.75 inches wide x 12 inches long 2 horse power motor...
Showing 1-15 of 33 Items