Equipment Search in Illinois
Votator 6 Head Stainless Steel Gravity Filler
Used Votator 6 Head Stainless Steel Gravity Filler with: 6 Heads Tank capacity: approximately 15 gallons Conveyor: Width: 3 inches Length: 57 inches Height: 33 inches Currently set for 32...
Stainless Steel Electric Frozen Block Flaker
Used Flaker with: Flaking drum width: 29 inches Previous application: frozen meat Manual product feed Electric motor Stainless steel construction
Matrix Pro Series 2085ZTR VFFS with All Fill B600 Filler
Used Matrix Pro Series 2085ZTR Vertical Form Fill and Seal with: Matrix Pro Series Bagger Maximum bag size: Length: 15 inches Width: 18 inches Jaw jam inhibit system Air system: air dump and...
Middleby Marshall PS770G Gas Two Stack Conveyor Oven
Used Middleby Marshall Conveyor Oven with: Maximum operating temperature: 550 degrees Fahrenheit Gas fired Double oven Warm up time: 15 minutes Input per hour: 175,00 BTU Conveyor width: 32...
Econocorp Econocaser Side Load Case Packer With Tape Closure
Used Econocorp Side Load Case Packer: Output: up to 10 cases per minute depending on the application Case dimensions: Length: 8-24 inches Width: 6-16 inches Height: 4-18 inches Tape closure...
OK International OK200 Poly Bag In Box Inserter Up To 15 Cases Per Minute
Used OK International Case Liner: Output: up to 15 cases per minute Case dimensions: Length: 10-23 inches Width: 8-16 inches Height: 6-18 inches Bag gauges: 0.6-5 mm Electrical: Volts: 480...
Sleeve Seal SSL-100 Stainless Steel Shrink Sleeve Applicator with SST-250S Steam Tunnel
USed Sleeve Seal Shrink Sleeve Applicator with: Production speed: up to 100 cans per minute, depending on application Bottle sizes: 25 - 125 mm diameter Label length: 25 - 180 mm Label thickness...
Reed 4-26x92 20 Pan Natural Gas 240,000 BTU Oven
Elevate your baking with the Reed 4-26x92 Natural Gas Revolving Tray Oven, engineered for consistent, high-quality results and optimal heat distribution. Its versatile design and robust construction...
SKA Fabricating Can-I-Bus Stainless Steel Depalletizer
Used SKA Fabricating Depalletizer with: Production speed: up to 400 cans per minute, depending on application Lift capacity: 400 pounds Max pallet height: 108 inches Pallet dimensions: Length...
SKA Fabricating Can-I-Pal High Level Infeed Palletizer W/ MCE Mass Flow Accumulation Table
Used Ska Fabricating Palletizer with: Production speed: 220 cans per minute, depending on product specification and conveyor size Lift capacity: 300 pounds Semi automatic Half height system...
Delta 2 Up Stainless Steel Print Registered Flow Wrapper
Used Delta 2 Up Stainless Steel Print Registered Flow Wrapper with: Production speed: up to 120 ppm, depending on applicaiton and product Seal jaw with: 9 inches Right to left product flow ...
Dorner Blue Belt Bucket Elevator 18'H x 12"W
Never Used Dorner Bucket Elevator: Blue belt with bucket style cleating Belt width: 12 inches Bucket capacity: approximately 22 cubic inches Infeed length: 24 inches Discharge length: 41 inches...
Berg AQ-150-3-R-3P Air-Cooled Water Chiller
Used Berg AQ-150-3-R-3P Air-Cooled Water Chiller with: Maximum allowable working pressure: 400 PSI at 400 degrees Fahrenheit Minimum design metal temperature: -20 degrees Fahrenheit at 400 PSI R22...
Pfaudler 200 Gallon SS Jacketed Tank
Used Pfaudler Tank with: Stainless steel 200 gallon capacity Maximum allowable working pressure: 75 pounds per square inch at 350° Fahrenheit Vacuum: 45 pounds per square inch Bottom...
76S30 Mixer with 30 HP Duty Maser Motor
Used 30 horsepower mixer with: 30 horsepower motor 3 phase, 60 hertz Overall dimensions (inches): 58.5 tall x 65 length x 32 wide