Description
Used BPI Premade Pouch Bagging System with:
- BC3200 Series Z Bucket Elevator:
- Discharge height:
- 110 - 126 inches
- Bucket capacity: 2 liters
- VFD variable speed controls
- Stainless steel construction
- Adjustable leveling feet
- Discharge height:
- MK1425 14 Head Dimpled Bucket CCW:
- Bucket capacity: 2.5 liters
- Weighing range:
- Minimum: 10 grams
- Maximum: 1500 grams depending on application
- Production output rate: up to 120 grams per minute depending on application
- HMI touch screen controls
- Air requirements: 8-15 CFM at 90 PSI of clean dry air
- 304 stainless steel construction
- RDP250 Premade Pouch Bagger:
- Jaw cycle speed: up to 45 cycles per minute depending on application
- Bag style: premade pouch (with or without zipper)
- Dual stage zipper style bag opening
- Gas flush
- Pillow bag size range:
- Minimum:
- Width: 5 inches
- Length: 5.9 inches
- Maximum:
- Width: 9 inches
- Length: 13.8 inches
- Minimum:
- Jaw style: resistance sealing system with horizontal serrations
- No bag detection with alarms and reject
- Air requirements: 8-15 CFM at 90 PSI of clean dry air
- Electrical: 220 volts, 60 hertz, 3 phase
- PT42 Rotary Pack Off Table:
- Diameter: 42 inches
- Variable speed VFD controls
- Adjustable leveling feet
- 304 stainless steel contact parts
- SP2000 Platform Mezzanine:
- Overall dimensions:
- Width: approximately 78 inches
- Depth: approximately 78 inches
- Height: apporximately 79 inches
- Overall dimensions:
Previous application: cheese crisps at 40 bags per minute
Let Us Handle Shipping
Let SIGMA’s experienced Logistics Team coordinate the safe delivery of your equipment—on time, fully insured, and professionally secured for transport.
- Ideal for purchases shipping from SIGMA Equipment or brokered within the U.S. or Canada
- Packaging verified for stability and protection
- Volume-partial or dedicated carrier options arranged for direct delivery
- Equipment securely strapped and insured for its full value
- End-to-end coordination for a worry-free experience
Use Your Own Carrier
Prefer to manage your own logistics? We’ll make it easy by providing all the pickup details your carrier needs.
- We supply shipment specs so your team can coordinate pickup
- Customer must provide a Bill of Lading (BOL) before truck arrival
- Responsibility transfers to customer upon equipment loading
We strongly discourage using LTL or Common Carriers for industrial equipment. These carriers often leave shipments unsecured and transfer them between terminals, increasing the risk of damage. Without added insurance, your shipment is unlikely to be covered for loss or damage.
All used equipment is sold "AS IS, WHERE IS, WITH ALL FAULTS". Specifications are approximate and intended as a guide only. Equipment may require inspection, modifications, or additional safety features before use.
- Payment: Full payment required before shipment; all sales are final.
- Delivery: Dates are estimates; SIGMA is not liable for delays or lost revenue due to delivery timing.
- Buyer Responsibility: Crating, rigging, installation, insurance, and compliance with all regulations are the buyer’s responsibility.
- Damage in Transit: Must be claimed directly with the carrier.
- Warranties: No expressed or implied warranties unless specified in writing.
- Indemnification: Buyer assumes all responsibility for safe installation, operation, and regulatory compliance of the equipment.
This is a summary only. Full terms apply to every sale. Please review our complete Terms & Conditions for Used Equipment before purchase.
