Description
The JBT Chopper/Blendercan quickly reduce frozen product to a flowable or pumpable condition. No longer must drums of frozen juice thaw for hours with resulting loss of quality. Instead, frozen concentrate, single strength juice or pulp can be processed soon after it is removed from the cold room. A fifty-five gallon drum of frozen concentrate can be processed in about 2.5 minutes. Fifty-five gallons of frozen single strength juice can be crushed in approximately 4 minutes and a 5 gallon pail of frozen pulp can be processed in approximately 2 minutes. Containers of various sizes and shapes, up to and including fifty-five gallon drums, can be handled by the Chopper/Blender. A hot water jacket around the lower portion and bottom of the Chopper/Blender tank complements the specially designed spiral blade. This combination rapidly chips and warms the product so that a flowable state is reached in a short time.
- Capacity: 300 gallons
- Tank dimensions:
- Diameter: 3 feet 9 inches
- Depth: 5 feet
- Hot water jacket: less than 15 psi at 190°F
- Ingredient/product hopper
- Spiral cutting blades
- Conical bottom
- 5 horsepower motor
- Spray ball CIP
- Electrical:
- Volts: 230/460
- Frequency: 60 Hz
- Phase 3
- Stainless steel construction
Products: Frozen pulp, Frozen single strength, Frozen concentrates
Let Us Handle Shipping
Let SIGMA’s experienced Logistics Team coordinate the safe delivery of your equipment—on time, fully insured, and professionally secured for transport.
- Ideal for purchases shipping from SIGMA Equipment or brokered within the U.S. or Canada
- Packaging verified for stability and protection
- Volume-partial or dedicated carrier options arranged for direct delivery
- Equipment securely strapped and insured for its full value
- End-to-end coordination for a worry-free experience
Use Your Own Carrier
Prefer to manage your own logistics? We’ll make it easy by providing all the pickup details your carrier needs.
- We supply shipment specs so your team can coordinate pickup
- Customer must provide a Bill of Lading (BOL) before truck arrival
- Responsibility transfers to customer upon equipment loading
We strongly discourage using LTL or Common Carriers for industrial equipment. These carriers often leave shipments unsecured and transfer them between terminals, increasing the risk of damage. Without added insurance, your shipment is unlikely to be covered for loss or damage.
All used equipment is sold "AS IS, WHERE IS, WITH ALL FAULTS". Specifications are approximate and intended as a guide only. Equipment may require inspection, modifications, or additional safety features before use.
- Payment: Full payment required before shipment; all sales are final.
- Delivery: Dates are estimates; SIGMA is not liable for delays or lost revenue due to delivery timing.
- Buyer Responsibility: Crating, rigging, installation, insurance, and compliance with all regulations are the buyer’s responsibility.
- Damage in Transit: Must be claimed directly with the carrier.
- Warranties: No expressed or implied warranties unless specified in writing.
- Indemnification: Buyer assumes all responsibility for safe installation, operation, and regulatory compliance of the equipment.
This is a summary only. Full terms apply to every sale. Please review our complete Terms & Conditions for Used Equipment before purchase.
