Description
Serpa Line: collator/cartoner, casepacker and palletizer. Made to package face masks but never put into production. Essentially like-new, very few run hours.
Line includes the following inventory numbers: E334415, E334416, E334413, E334414
- Serpa P200 Side Load Glue Case Erector And Packer
- Output: up to 20 cases per minute depending on the application
- Glue sealing mechanism
- Case dimensions:
- Length: 6-20 inches
- Width: 5-13 inches
- Depth: 4.5-13 inches
- Side loading
- Servo driven
- Allen Bradley controls
- Electrical:
- Volts: 480
- Frequency: 60 Hz
- Phase 3
- FLA: 21.36
- NEMA 12 enclosure
- Stainless steel construction
- Included is a corner wrap case labeler and discharge conveyor
-
Serpa P150 Cartoner:
- Output: up to 80 cartons per minute
- Carton dimensions:
- Length: 0.75-4 inches
- Width: 0.5-3 inches
- Depth: 2.5-7 inches
- Intermittent motion
- 2 arm rotary vacuum pick off with prebreak
- Powered magazine
- (2) pick and place cells each with 2 delta robots
- Electrical:
- Volts: 480
- Frequency: 60 Hz
- Phase 3
- Stainless steel construction
- Allen Bradley controls
- Nordson glue system
-
Fanuc Robotic Palletizer:
- Four (4) axis robot
- Reach capability:
- 123.7 inches / 3143 millimeters
- Load capacity:
- 407 pounds / 185 kilograms
- Controller cabinet
- Pallet Magazine: 48x40 inches
- Slip sheet magazine
- Multi-function pick head:
- Pallet pick up
- Slip sheet pick up
- Product pick up
- Electrical:
- Volts: 480
- Frequency: 60 Hz
- Phase 3
- Pedastool mounted
-
Lantech QLA Stretch Wrapper
- Speed: up to 45 loads/hour
- Load size:
- Minimum: 36 inches long x 36 inches wide x 24 inches high
- Maximum: 54 inches long x 48 inches wide x 92 inches high
- Maximum load weight: 4,000 pounds
- Rotation speed: up to 15 rotations/minute
- Film specifications:
- Pre-stretch: 225%
- Web width: 20 inches
- Maximum diameter: 10 inches
- HMI: Allen Bradley PanelView Plus 7
- PLC: Allen Bradley CompactLogix 5380 Series
- Electrical: 460V/3 phase/60hz/18 amps
- Pneumatic: 3-5 cfm @ 80 psi
Let Us Handle Shipping
Let SIGMA’s experienced Logistics Team coordinate the safe delivery of your equipment—on time, fully insured, and professionally secured for transport.
- Ideal for purchases shipping from SIGMA Equipment or brokered within the U.S. or Canada
- Packaging verified for stability and protection
- Volume-partial or dedicated carrier options arranged for direct delivery
- Equipment securely strapped and insured for its full value
- End-to-end coordination for a worry-free experience
Use Your Own Carrier
Prefer to manage your own logistics? We’ll make it easy by providing all the pickup details your carrier needs.
- We supply shipment specs so your team can coordinate pickup
- Customer must provide a Bill of Lading (BOL) before truck arrival
- Responsibility transfers to customer upon equipment loading
We strongly discourage using LTL or Common Carriers for industrial equipment. These carriers often leave shipments unsecured and transfer them between terminals, increasing the risk of damage. Without added insurance, your shipment is unlikely to be covered for loss or damage.
All used equipment is sold "AS IS, WHERE IS, WITH ALL FAULTS". Specifications are approximate and intended as a guide only. Equipment may require inspection, modifications, or additional safety features before use.
- Payment: Full payment required before shipment; all sales are final.
- Delivery: Dates are estimates; SIGMA is not liable for delays or lost revenue due to delivery timing.
- Buyer Responsibility: Crating, rigging, installation, insurance, and compliance with all regulations are the buyer’s responsibility.
- Damage in Transit: Must be claimed directly with the carrier.
- Warranties: No expressed or implied warranties unless specified in writing.
- Indemnification: Buyer assumes all responsibility for safe installation, operation, and regulatory compliance of the equipment.
This is a summary only. Full terms apply to every sale. Please review our complete Terms & Conditions for Used Equipment before purchase.
