Description
Used Doosan NHP4000 Machining Center:
- Type of CNC control: Fanuc 31i-B
- Axis travel:
- X-Axis Travel 22.047 in (560 mm)
- Y-Axis Travel 25.196 in (640 mm)
- Z-Axis Travel 25.984 in (660 mm)
- Table loading area: 15.75 x 15.75 inches
- Maximum part diameter 24.8 in (630 mm)
- Maximum part height (with no hydraulic interface) 35.43 in (900 mm)
- Indexing table and pallet changer: indexing full B-axis
- Indexing table and pallet changer: pallet surface (standard, no center bushing) (24) M16 x 2.0 tapped base
- Motion: X, Y and Z axes rapid traverse rate 2,362 ipm (60 m/min)
- Spindle
- Big Plus Spindle System CAT 40 Big Plus
- Speed 15,000 rpm
- Motor (S3 25%) 25 / 49.6 hp (18.5 / 37 kW)
- Torque (S3 10%) 223.6 ft-lbs (303 nm)
- Automatic Tool Changer Specifications: Number of Tools 275
- DN Linear Pallet System
- Pallet Dimension 15.7 x 15.7 in (400 x 400 mm)
- Workpiece Diameter 24.8 / 23.6 in (630 / 600 mm)
- Workpiece Weight 881.8 lbs (440 kg)
- Forking Type Single Fork (Telescopic Mechanism)
- Turntable Indexing 45Ń
- Number of Machines Expandable 1 ~ 7
- Number of Setup Stations 1
- Number of Pallets 12 (6 x 6 Double Stack)
- Equipped With
- CUFOS PC based control system
- Fanuc 31i-B Control
- 275 Position Matrix Tool Magazine
- LPS4000-12 Pallet Pool
- LNS\Turbo, MF2, rear discharge, filtering chip conveyor
- ChipBLASTER Modular* 1,000 PSI, 2-8 GPM variable flow coolant system
- MistBLASTER Modular* 1200 CFM mist collector.
- Renishaw NC4 universal tool setting probe.
- Renishaw RMP60 spindle probe,
- BK Mikro, tool changer mounted, broken tool detection system.
- (12) Pallets included (tombstones not included)
- Power Required 80 kVA / 210 amps @ 220v
- Voltage Required - Fanuc 2-5-235 Volts / 3 Phase
- General: Machine Height 105.9 in (2,690 mm)
- General: Floor Space Required (L x W) 195 x 90.55 in (4,950 x 2,300 mm)
- General: Machine Weight 21,384 lbs (8,700 kg)
Let Us Handle Shipping
Let SIGMA’s experienced Logistics Team coordinate the safe delivery of your equipment—on time, fully insured, and professionally secured for transport.
- Ideal for purchases shipping from SIGMA Equipment or brokered within the U.S. or Canada
- Packaging verified for stability and protection
- Volume-partial or dedicated carrier options arranged for direct delivery
- Equipment securely strapped and insured for its full value
- End-to-end coordination for a worry-free experience
Use Your Own Carrier
Prefer to manage your own logistics? We’ll make it easy by providing all the pickup details your carrier needs.
- We supply shipment specs so your team can coordinate pickup
- Customer must provide a Bill of Lading (BOL) before truck arrival
- Responsibility transfers to customer upon equipment loading
We strongly discourage using LTL or Common Carriers for industrial equipment. These carriers often leave shipments unsecured and transfer them between terminals, increasing the risk of damage. Without added insurance, your shipment is unlikely to be covered for loss or damage.
All used equipment is sold "AS IS, WHERE IS, WITH ALL FAULTS". Specifications are approximate and intended as a guide only. Equipment may require inspection, modifications, or additional safety features before use.
- Payment: Full payment required before shipment; all sales are final.
- Delivery: Dates are estimates; SIGMA is not liable for delays or lost revenue due to delivery timing.
- Buyer Responsibility: Crating, rigging, installation, insurance, and compliance with all regulations are the buyer’s responsibility.
- Damage in Transit: Must be claimed directly with the carrier.
- Warranties: No expressed or implied warranties unless specified in writing.
- Indemnification: Buyer assumes all responsibility for safe installation, operation, and regulatory compliance of the equipment.
This is a summary only. Full terms apply to every sale. Please review our complete Terms & Conditions for Used Equipment before purchase.
