Used Auger Conveyor

69 Used Items
Page 1 of 5

This type of conveyor uses a rotating spiral blade within a tube or trough to move liquids, powders, or similar loose materials. A large screw within the conveyor rotates around a central axis, causing the product to move forward with each progressive revolution of the screw. They can be used to move product horizontally or at an incline.


Start Your Project

M26TAG25 photo
COMAT M26TAG25 Stainless Steel Auger Conveyor Curd Cutter System

Used COMAT Auger Conveyor Curd Cutter System with: Capacity: up to 2,000 kilograms per hour depending on product and application Auger dimensions: Length: 96 inches Diameter: 9.75 inches Flights: 10...

Screw Conveyor 108H photo
Weighpack Screw Conveyor 108H Stainiless Steel Auger Conveyor with Hopper

Used Auger Conveyor with: Auger: Flight: 2 inches Pitch: 3 inches Shaft diameter: 1.75 inches Total length: approximately 140 inches Tube: approximately 5.5 inches Discharge: 108 inches Hopper: ...

 photo
Stainless Steel 160" Long Screw Auger Conveyor W/ 5 HP

Stainless steel 160 inch long screw auger conveyor used to lift particulate or lump product to be dumped at a controlled rate out of a 6 inch spout. Hopper Dimensions Length: 11 inches Width: 14 inches...

 photo
Material Transport Hopper with Incline Auger Conveyor

Used Material Transport Hopper with Incline Auger Conveyor with: Hopper dimensions: 60 inches x 60 inches Hopper infeed height from ground: 68 inches Auger length: 70 inches long Auger width: 15...

C-12-K2212 photo
Rietz C-12-K2212 Stainless Steel Screw Auger Conveyor

Used Rietz Auger Conveyor with: Auger dimensions: Length: 144 inches Diameter: 12 inches Infeed height: 28 inches Discharge height: 74 inches Motor: 3 horsepower Electrical requirements: 230/460...

Hydrolift photo
Vanmark Equipment Hydrolift Destoner 10 HP Stainless Steel Vertical Auger Conveyor and Rock Remover

Used Vanmark Auger Conveyor and Rock Remover with: Hydrolift Destoner: Model: Hydrolift series 2100 Discharge rate: up to 50,000 pounds per hour depending on product and application Water consumption:...

SD-92-03 photo
DKOFAB SD 92 03 SS Inclined Auger Screw Conveyor with 2 Hp Motor

Used DKOFAB SS Inclined Auger Screw Conveyor with: Auger screw: 2 inch shaft diameter 3.5 inch cleat height 9.5 inch centers Trough: 105 inches long x 9 inches wide 2 horsepower motor...

 photo
Stainless Steel Twin Screw Auger Conveyor w 78" H Discharge

Used Twin Screw Auger Conveyor: Twin screws: Pitch 3.5 inches Flights: 2 inches Center diameter: 2 inches Dual variable speed controls for separate metering Dual hopper for 2 products Infeed:...

ISW photo
All-Fill Stainless Steel Auger Conveyor and Hopper

Used All-Fill Auger Conveyor and Hopper With: NON-FOOD GRADE Agitated hopper: Length: 39 inches Width: 30.5 inches Infeed Height: 43 inches Discharge height: 90 inches Auger: ...

 photo
8 Inch Wide x 126 Inch Long Auger Conveyor

Used 8 Inch Wide x 126 Inch Long Auger Conveyor with: Trough diameter: 10 inches Auger flight centers: 10 inches Infeed/outfeed dimensions: 10 length x 10 width (inches) Motor: 1 horsepower Carbon...

 photo
Flexicon Portable Auger Conveyor w Hopper & Screw

Used Flexicon Portable Auger Conveyor and Hopper with: Production output rate: 1750 rotations per minute Distance between auger flights: 4 inches Auger length: 150 inches Infeed diameter:...

SC-1 photo
General Processing Systems Incline Auger Conveyor

Used General Processing Systems Incline Auger Conveyor with: Hopper dimensions: 53 inches wide x 42 inches long x 47 inches tall Infeed height: 96 inches Open hopper top Auger length: 113 inches Discharge...

unknown photo
192" L Stainless Steel Portable Auger Conveyor with Hopper

Used Stainless Steel Auger Conveyor with: Auger dimensions: Length: 192 inches Diameter: 10 inches Hopper dimensions: Length: 47 inches Width: 45 inches Infeed height: 45 inches Discharge...

 photo
20 inch Diameter x 13 Foot Long Stainless Steel Screw Auger W/ 3 HP Motor

Used Stainless Steel Screw Auger with: Screw dimensions (inches): Length: 156 Diameter: 20 Pitch: 16 Hopper dimensions (inches): Length: 56 Width: 71 Depth: 42 Height: 57.5 Discharge...

FA-800 photo
AMS FA-800 with Center Shaft Auger Screw Feeder 10' Discharge Height

These versatile feeders can convey both free flow and non-free flow products and sport a heavy-duty bulk hopper with safety grate. Built for floor-level-to-fill hopper feeding, these feeders are simple to clean...

Showing 1-15 of 69 Items

Enter your email address to get started.