Used Spiral Conveyors

30 Used Items
Page 1 of 2

This type of conveyor uses a spiral configuration to lift or lower a product. Spiral conveyors allow for a shallow slope, and save floor space by making use of vertical space.

Ultra 1-32-AL/SS-1700-900-AC photo
I.J. White Sys. Ultra New Way Spiral Cooling Tower

Used I.J. White Systems Ultra New Way Spiral Cooling Tower with: Cooling time: 20 minutes at 1,944 pounds per hour Belt loading pattern: 6 pieces across with 4 inch leading edge...

1500-400-D1-2.75 photo
Ryson Spiral Incline Case Conveyor 16" Wide

Used Ryson Spiral Case Conveyor with: Conveyor width: 16 inches Infeed height: 48 inches Discharge height: approximately 12 feet Outfeed orientation: 90 degree left hand turn, relative to the...

 photo
Nercon Spiral Elevating Conveyor 4.625 Inches Wide

Used Nercon 4 5/8" Wide Spiral Elevating Conveyor with: 19 tiers 6 5/16 inches of clearance between tiers 4 5/8 inch wide effective conveyor belt Adjustable guide rails Infeed height is currently...

1200-300-C4 photo
Ryson 12" W Left Hand Turn Decline Spiral Conveyor
Can Rent

Used Ryson Spiral Conveyor with: Decline spiral conveyor Counter-clockwise spiral 180 degree product discharge, product enters and exits the conveyor on the same side Infeed height: 126 inches ...

 photo
7 Tier Stainless Steel Spiral Conveyor

Used Spiral Conveyor with: 7 tiers 7.5 horsepower stainless steel motor Maximum product height: 5.75 inches Maximum product width: 7.5 inches Infeed height: 35 inches Outfeed height: 128...

 photo
7 Tier Stainless Steel Spiral Conveyor

Used Spiral Conveyor with: 7 tiers 7.5 horsepower stainless steel motor Maximum product height: 5.75 inches Maximum product width: 7.5 inches Infeed height: 35 inches Outfeed height: 128...

Spiralveyor SV photo
Ambaflex Spiralveyor Spiral Case Elevator
Can Rent

Used Ambaflex Spiralveyor Spiral Case Elevator with: Conveyor width: 12 inches Infeed height: 36 inches tall Outfeed height: 117 inches Product height clearance: 12.5 inches 4 tiers Plastic...

SV-400-1300 photo
Ambaflex SV-400 Spiral Conveyor with Infeed

Used Ambaflex SV-400 Spiral Conveyor with Infeed with: Conveyor width: 16 inches Infeed height: 36 inches 3 tiers Height between tiers: 17 inches Outfeed height: 111 inches 1 horsepower...

1200300 photo
Ryson Declining Spiral Conveyor 12" Wide Belt

Used Ryson Spiral Conveyor with: Belt specs: Poly belt slat belt Width: 12 inches Infeed height: approximately 107 inches Outfeed height: approximately 34 inches Infeed & outfeed...

4577-02 photo
AmbaFlex 4577-02 Spiral Case Reversible Conveyor

Used AmbaFlex 4577-02 Spiral Case Reversible Conveyor with: Unit can run as an incline or decline Conveyor width: 8 inches Seven (7) tiers: 10 inch tier clearance Maximum product clearance: 9.25...

 photo
Ryson Incline Spiral Conveyor 20 Inches Wide

Used Ryson Incline Spiral Conveyor with: Conveyor width:: 20 inches Motor: 7.5 horsepower Infeed height from floor: 30 inches Outfeed height from floor: 15 feet Clearance height: 27 inches ...

 photo
Ryson Incline Spiral Conveyor 22 Inches Wide

Used Ryson Incline Spiral Conveyor with: Conveyor width:: 22 inches Motor: 7.5 horsepower Infeed height from floor: 36 inches Outfeed height from floor: 22 feet Clearance height: 27 inches ...

 photo
Ryson Decline Spiral Conveyor 22 Inches Wide

Used Ryson Decline Spiral Conveyor with: Conveyor width:: 22 inches Motor: 7.5 horsepower Outfeed height from floor: 30 inches Infeed height from floor: 24 feet Clearance height: 28 inches ...

 photo
Ryson Incline Spiral Conveyor 20 Inches Wide

Used Ryson Incline Spiral Conveyor with: Conveyor width:: 20 inches Motor: 7.5 horsepower Infeed height from floor: 30 inches Outfeed height from floor: 17 feet Clearance height: 25 inches ...

14 Tier photo
Northfield Stainless Steel Spiral Cooling Conveyor

Used Northfield Spiral with: Configuration: in low - out high Convneyor: Stainless steel Width: 36 inches Linear length: 650 feet Number of tiers: 14 Tier spacing: 8 inches Counter-clockwise...

Showing 1-15 of 30 Items

Enter your email address to get started.