Used Equipment


13947 Used Items
Page 631 of 930

Search Within

Put our team on the search!

The SIGMA acquistions team can help find what you're looking for.

CS25 photo
Pearson CS25 Top Tape Case Sealer with Controls

Used Pearson Automatic Tape Case Sealer with: Production output rate: up to 25 cases per minute Erected case sizes: Length: 8 - 24 inches Width: 5 -16 inches Open depth: 7 -22.75 inches...

 photo
Nercon Bi-Directional Accumulation Table 95" x 86"

Used Nercon Accumulation Table with: Type: mass flow Belt: interlocking chain Length: 86 inches Width: 95 inches Variable speed driven belt geared-reduced to 4.4/22 rpm Power...

3D-S1 photo
Omega Design Corporation 3D-S1 Unscrambler Machine

Used Omega Design Corporation 3D-S1 Unscrambler Machine with: Designed for round or square bottles Production output rate: 100 bottles per minute Bowl diameter: 36 inches Power supply: 240 voltage...

HT-20 photo
Hitachi Seiki HT 20 Lathe 15 Horsepower

Used Hitachi Seiki HT 20 Lathe with: Chuck size: 4.5 inches Bar capacity: 1.75 inches 2 axis 15 horsepower motor Swing: 17.7 inches Maximum RPM: 3,600 Approximate weight: 7,000 pounds

Dacs Wn 030-SB/PC-I photo
Ishida DACS-WN-030-SB/PB-I Checkweigher

Used Ishida DACS-WN-030-SB/PB-I Checkweigher with: Belt speed: Up to 300 feet per minute Product weight range: 30 to 3000 grams Load cell accuracy: +/- 1 gram Minimum product size: 3.1 length x 1.1...

PRTG 2150 photo
Phoenix PRTG-2150 Automatic Rotary Arm Wrapper

Used Phoenix PRTG-2150 Automatic Rotary Arm Wrapper with: Designed for extremely heavy, tall, or very light and unstable loads Production output rate: 40 loads per hour Maximum load size: 56 length x 56...

NM600HA photo
Norden NM600HA Hot Air Tube Filler and Closer

Used Norden Tube Filler with: Output: up to 60 tubes per minute, depending on tube size & product Number of pockets: 22 Tube materials: Plastic Laminates Tube size range: Length: 50 -...

NM620HA photo
Norden NM620HA Hot Air Tube Filler and Sealer

Used Norden Tube Filler with: Output: up to 60 tubes per minute, depending on tube size & product Number of pockets: 22 Tube size range: Length: 50 - 250 mm Diameter: 10 - 50 mm Includes: ...

IR59 photo
Ruhle IR59 Stainless Steel Curing Injector

Used Ruhle Injector with: Output: Up to 8,800 pounds per hour Up to 4,000 kilgrams per hour Variable speed: 24/48 strokes per minute Needle specs: Two rows of needles Number of needles: 59...

TSP3-SDI-CLP photo
Sidel Cermex Model Tray Packer and Shrink Bundler

Used Sidel Cermix Tray Packer & Bundler with: Output: Minimum up to 30 cycles per minute Maximum: up to 60 cycles per minute Includes: Tray former Shrink tunnel Can run the following...

F30-48 H photo
Thermatron F30-48H H Frame Press Sealer

Used Thermatron Generator Press H Frame with: Last used for sealing window in convertible car tops 30-KW output generator frequency stabilized Heavy duty air operated press Three 6 inch diameter main...

HS-1 photo
Shanklin HS1 Side Sealer w Lugged Infeed Conveyor

Used Shanklin HS-1 Hy-Speed Side Sealer with: Shanklin HS-1 High speed side sealer: Package size range: Minimum: .5 inches wide x 1/8 inch high x 3 inches long Maximum: 16 inches wide x 6 inches high...

V5 HD photo
Harris Selco V5 HD Vertical Downstroke Baler

Used Harris-Selco Baler with: Vertical downstroke baler 10 Horsepower Cycle time: 50 seconds (no load) Main cylinder: 6 Inch bore Stroke: 48 inches Maximum platen force: 50,900 pounds ...

T-62 photo
Shanklin T-62 Dual Chamber Heat Tunnel 18"W x 11"T

Used Shanklin T-62 Heat Tunnel with: Aperture: Width: 18 inches Effective height: 11 inches Tunnel length: 60 inches Dual heating chambers Manual adjustments Analog thermostat Independent...

CW-10 photo
All-Fill CW10 Stainless Steel Digital Checkweigher

Used All-Fill CW-10 Stainless Steel Digital Checkweigher with: Side belt transfer with 2 inch high rails Belt dimensions: 48 length x 13.75 width (inches) Side belt feeder dimensions:...

Showing 9451-9465 of 13947 Items

Enter your email address to get started.