Used Equipment


14260 Used Items
Page 250 of 951

Search Within

Put our team on the search!

The SIGMA acquistions team can help find what you're looking for.

unknown photo
192" L Stainless Steel Portable Auger Conveyor with Hopper

Used Stainless Steel Auger Conveyor with: Auger dimensions: Length: 192 inches Diameter: 10 inches Hopper dimensions: Length: 47 inches Width: 45 inches Infeed height: 45 inches Discharge...

3600 photo
Urschel Comitrol 3600 Stainless Steel Regrind Processor

The Comitrol Processor Model 3600 is designed for low to high capacity production environments. Processors benefit from the wide selection of cutting available for diverse applications such as chopping, flake cutting,...

Spartan photo
Econoseal Spartan 7512 Glue Hand-Load Horizontal Cartoner

Used Econoseal Spartan 7512 Glue Hand-Load Horizontal Cartoner with: Speed: up to 2,400 cartons per hour, depending on application Minimum carton size: Length: 2 inches Width: 1 inch HeightL 5 inches...

MTRP-001-3BD18 photo
Mateer Packaging Head

Used Mateer Packaging Head with: Horsepower: 1/2 Rotations per minute: 1725 Stainless steel construction Electrical requirements: 230/460 volts, 60 hertz, 3 phase Head only

 photo
Mateer Packaging Head

Used Mateer Packaging Head with: Horsepower: 1/2 Rotations per minute: 1725 Stainless steel construction Electrical requirements: 230/460 volts, 60 hertz, 3 phase Head only

MTR2-P50-3BD18 photo
Mateer Packaging Head

Used Mateer Packaging Head with: Horsepower: 1/2 Rotations per minute: 1725 Stainless steel construction Electrical requirements: 230/460 volts, 60 hertz, 3 phase

Mustang IV Wrapper photo
Doboy Mustang IV 1-Up Flow Wrapper

Used Doboy Mustang IV Flow Wrapper with: Production speed: up to 50 per minute, depending on product Product dimensions (inches): Minimum: Length: 3.5 Width: 2 Maximum: Length: 15 Width:...

 photo
Loveshaw Taper/Closer

Taper/Closer – On Casters Manufacturer- Loveshaw Model- LD16CLT Serial #-N/A Rough Size- 10’4” long X 4’0” wide X 6’4” tall

IM7-14 photo
HMC IM7-14 Pouchmaster Horizontal Form Fill and Seal

Used HMC Horizontal Form Fill and Seal with: Max output: up to 100 pouches per minute depending on product and application Minimum pouch size dimensions: Width: 2 inches Height: 2 inches Maximum...

 photo
Paddle Blender with 9" Auger Feeder Discharge

Used paddle blender with: Blender V shaped working area: Length 72 inches Width: 48 inches V shaped depth 36 inches Blending paddles: 5 sets on: 10 inch shafts paddle: 4 X 8 inches ...

500 photo
Vemag 500 Twin Screw Extruder with Guillotine Cutter

Used Vemag 500 Twin Screw Extruder with: Guillotine cut-off attachment Filling rate: up to 2,500 kilograms an hour (depending on product) Portioning speed: up to 450 portions per minute (depending...

Linium 301 photo
Doboy Linium 301 Print Registered Horizontal Flow Wrapper

Used Doboy Linium 301 Print Registered Horizontal Flow Wrapper with: Output: 50 to 300 packages per minute, depending on product and film Adjustable former Minimum product dimensions: 3.5 inches long...

ElVSl22 photo
Bestpack ELVSL22 3H Bottom Seal 2" Tape Case Erector

Used Bestpack EIVSI22 Case Erector with: Output: up to 15 cases per minute depending on product Bottom seal 2 inch tape head Case dimensions: minimum: 7.5 inches long x 5 inches wide x 3 inches...

ElVSl22 photo
Bestpack ELVSL22 3H Bottom Seal 2" Tape Case Erector

Used Bestpack EIVSI22 Case Erector with: Output: up to 15 cases per minute depending on product Bottom seal 2 inch tape head Case dimensions: minimum: 7.5 inches long x 5 inches wide x 3 inches...

T-72 photo
Shanklin T-72 Dual Chamber Heat Tunnel 9" Tall x 22" Wide

Used Shanklin T-72 Dual Chamber Heat Tunnel with: Temperature range: 50 to 500 degrees fahrenheit Working aperture: 9 inches tall x 22 inches wide Heat tunnel length: 83 inches Conveyor...

Showing 3736-3750 of 14260 Items

Enter your email address to get started.